Oxdale TM400 Big Base PTO Log Splitter
The TM400 range of log splitters is suitable for most tractors. The
splitter fits to a standard rear three-point linkage tractor and only requires
a hydraulic power supply and a free flow return.
- Big
base acts like a table, it can lifted up on the links to make splitting
easier.
- 14 l/m oil flow minimum needed.
- 10 tonne splitting force
- Splits up to 45cm / 18" 14 l/m minimum oil flow needed
- The splitting wedge is specially forged, hardened and has a double
chamfer to give the best splitting action available on the market
- Suitable for all tractors with ISO CAT 1 and CAT 2 linkages;
including low HP compact tractor and large high horsepower tractors
- The unit can be fitted on the front or rear three-point linkage
- For added safety all the hydraulic pipes are covered in anti-burst
lagging and both hands are required on the lever to operate the ram.
- Lifting the lever will power the splitting wedge through the logs
and lowering the lever will retract the ram
- Capable of splitting logs up to 18 inches high and is not limited to
the width of logs it can split
- 20Hp minimum
The TM400 range of log splitters is suitable for most tractors. The
splitter fits to a standard rear three-point linkage tractor and only requires
a hydraulic power supply and a free flow return. Oxdale has been
manufacturing the TM range for 12 years and now have over 10,000 units
working throughout the UK and Europe.
The beauty of this log splitter
allows the user to work the machine at ground level for those larger diameter
rounds or it can be raised to a comfortable waist height for those easier to
handle logs. The unique axe head allows a 10-ton capacity ram to be fitted
which makes the splitting operation very quick. Tractor mounted hydraulic
log splitter which runs off the tractor’s hydraulics.
The TM400 Big Base in the video is running on a Kubota M6040
Specifications
TM400
Big Base
133cm Height
Base 60cm Width
Link to Link 86cm
Weight
80kg
Technical specs
Linkage: ISO CAT 1/2
Max operating pressure: 3625 psi/250 bar
Minimum oil flow: 14L per minute
Ram bore diameter: 60mm
Ram stroke: 400mm
Ram rod diameter:
40mm