Out of Stock

Contact us for a price



(Scotland & Ireland will incure an additional
shipping surcharge, for a
complete shipping cost to these locations please
contact us)
The Jansen BX-62RS is a top class wood shredder. With its hydraulic retraction, working with this machine is a real pleasure. There is no pushing, pushing, etc. with this model; the 2 large feed rollers do this alone. The speed of the feed rollers can be varied continuously. This is important in order to match the feed speed to the diameter of the shredded material. Smaller diameters can be drawn in faster than larger diameters. Should the feed still block, the feed can be put into reverse mode via the large bracket on the funnel. Furthermore, the feed can also be switched off using this bracket. The supply takes place via the tractor hydraulics; What is needed is a pressure flow and a pressure-free return or a double-acting control unit. A liter output of approx. 10 l / min is required to operate the feed rollers sufficient.

The latest version of the BX-62 - the BX-62 RS, has double-sided suspension of the feed rollers and a reinforced feed hopper. There are similar versions of this shredder at lower prices, but they do not have these reinforcements. This can lead to bending of the feed rollers and bearing damage, since they are only suspended on one side and one side of the rollers hangs freely. Also some competitors give their shredders as BX-62, although they are different types. If necessary, check your competitive offers carefully.

The wood chipper is delivered complete with PTO. A shear pin is installed on one side of the PTO shaft, which for safety reasons serves as a predetermined breaking point in the event of blockages or overloads. Larger tractors with more than 100 HP can be used without any problems. You should have at least 30 HP of engine power available. The PTO speed must be 540 rpm. be.

The hopper has an opening of 63.5 x 63.5 cm at the top; in the lower area the opening measures 16.5 x 30.5 cm. A maximum of 16.5 cm in diameter can be shredded. Many competitors give the maximum shredded material diameter equal to the dimensions of the lower filling opening, but this information is unrealistic and can trigger the safety mechanism in the PTO. Softer woods can be shredded with a width of up to 25 cm, whereby such starches are usually processed into firewood and not chopped.

The processing of the BX-62RS is very solid! The material thicknesses of the sheets used are 10 and 12 mm in the load-bearing area, 4 and 6 mm on the funnels and on non-load-bearing parts. If necessary, compare these values ??with competing models, because you can often save!

The funnel can be easily folded up for transport and secured with a split pin. The chopper has 2 shock absorbers to make it easier to fold up.

The machine is very easy to maintain; so you can open the entire flywheel cover by loosening just one screw and have access to the 4 cutting blades. These cutting knives have blades on both sides so that they can be easily rotated if necessary. The flywheel has a dead weight of 95 kg and has attached wings, which generate the very strong pull through which the shredded material is ultimately blown out through the discharge funnel. Clogging of the shredder is almost impossible due to this very strong draft.

The discharge funnel has a height of 220 cm (plus the lower link lift) and can be rotated 360 degrees. On request, we can also supply you with an extension chute extension of 50 cm. This means that the shredded material can easily be filled on tractor trailers or directly in big bags. The ejection angle can also be changed. The BX-62RS throws the shredded material up to 10 meters!

The shredder is designed for 3-point suspension and can be used from Cat. I.

Technical specifications: