JANSEN TS-30 30T PTO DRIVEN LOG SPLITTER (PTO)
(Scotland & Ireland will incure an additional
shipping surcharge, for a
complete shipping cost to these locations
please
contact us)
Current delivery and despatch
times are running at around 2 weeks,
please bear this in mind when
ordering.
Here Jansen offer you one of our
latest models in the field of log splitters. It
is a very heavy and robust version. The
splitter's own weight is 370 kg!
Manufactured
and produced in accordance with the latest EU product safety standard EN 609:
2017.
The enormous splitting
force of approx. 30 tons is generated by means of a tractor / tractor (drive via
PTO, not included in the scope of delivery).
The attached log lifter
is very practical, with which it is very easy to set up heavy
logs. If the log lifter is
not required, it can simply be snapped into the upper position and serves as a
second protective bar.
Using a simple spring
mechanism, the device can be operated in 2 different operating
modes:
- The
riving knife automatically moves back up to the preset position after
releasing the operating lever (can be varied continuously using a
lever). Very
quick and effective work is possible here, since you do not have to manually
raise the wedge again. The
spring must be unhooked for this operating mode.
- The
riving knife remains in any position after releasing the operating lever and
only moves back by pushing up the operating lever. The
spring must be hooked in for this function.
The log splitter stands
on 2 wheels and also has a transport wheel. Thanks
to this transport wheel, the log splitter can also be transported by
hand. However, it is
advisable to involve a second person. Alternatively,
it can of course be hung in the 3-point of a tractor. The
cylinder can be lowered to a height of 1.99 meters with little
effort.
The log splitter works
at 2 speeds: a faster one for starting on the wood and a slower one for the
splitting process. In
the slow speed one can assume a doubling of the time.
A
splitting cross is included in the scope of delivery of the log
splitter. Within
the European Union, this splitting cross may not be used when using the log
splitter, since the new EU standard EN 609: 2017 generally prohibits the use of
multiple splitting wedges and splitting crosses for log
splitters.
Any
use of the split cross is at your own risk and at your
responsibility.
The devices are very
stable and have an enormous performance. You
won't find any logs of wood that this splitter doesn't get
small.
Technical specifications:
- Drive:
PTO (not included), max. 540
rpm.
- Splitting
force: max. 30
tons
- Trunk
lifter: included
- Split
cross: included (use at your own risk)
- Length
riving knife: 26 cm
- Operating
modes: 2
- Cylinder
stroke limitation: adjustable
- Weight:
370 kg
- Gap
length: max. 110
cm
- Distance
from wedge to floor: approx. 16 cm (fully extended)
- Maximum
cylinder speed (forward / reverse): 5.5 seconds / 9.5
seconds
- Outer
cylinder diameter: 138 mm
- Piston
rod diameter: 70 mm
- Split
cross: included (use at your own risk)
- Dimensions
built up: max. 154x140x251
cm (LxWxH)
- Dimensions
built up: min. 154x99x251
cm (LxWxH)
- Dimensions:
120x80x206 cm (LxWxH)
- Hydraulic
oil quantity: approx. 30 l (HLP46)
Please note that all Jansen equipment is sold subject
to these conditions in addition to our standard
T&C's.