JANSEN FLAIL MOWER WITH HYDRAULIC SIDESHIFT EFGCH-135
(Scotland & Ireland will incure an additional The especially robust construction of the mulch mower EFGCH-135 with hydraulic sideshift makes it stand out. It has a special reinforced angular gearbox and is outstanding in its operation as a mulch mower, a flail mower, etc.
shipping surcharge, for a
complete shipping cost to these locations please
The flail mower has a mowing width of 132 cm and is driven using a P.T.O, included as part of the delivery.
By using the hydraulic lateral traverse function the mower can be moved to both left and right. For this function you need a hydraulic control circuit on your tractor, as the mower unit has a double-action hydraulic cylinder for this purpose.
Due to the open rear bonnet maintenance work or changing hammer blades will be facilitated. Please be informed that the bonnet has to be closed while operating.
This mower unit has the most heavy-duty gearbox in its class. Unlike mower units equipped with light Y blades, this mower has high inertia generated by the heavy hammer blades and heavy shaft. This allows our machine to perform better.
The 24 specially hardened, 0.8 kg hammer blades, which are arranged on a double spiral drive shaft, shred clippings to a minimum size. Even very high grass, bushy or straw-like clippings are no problem for this mower!
The mulcher additionally has a trailing roller and a freewheel gearbox. The cutting height can be set with the top controller and runners mounted on the side. The suspended, galvanised slats at the front of the mower unit prevent stones escaping.
The mower unit is hung using the three point linkage of your tractor (from Cat. I. upwards). Your tractor should have at least 20-30HP.
- Length: 1320 mm
- Weight: 313 kg
- Weight including packing: 380 kg
- Hydraulic Side-shift
- P.T.O: Included in delivery
- Rpm: 540
- drive shaft Ø: 100 mm
- trailing roller Ø: 95 mm
- Drive: 3 piece drive belt
- Packaging: wooden crate
- Dimensions of packaging: 1550x880x810 mm (LxWxH)
- Mounting: three point hitch from Cat. I
- Tractor: min. 20-30 HP
Please note that all Jansen equipment is sold subject to these conditions in addition to our standard T&C's.